Error 692 gjate Dial-UP connection

[Matrix]

po bej dial up connection, por me shfaqet Error 692: Hardware failure.

Nuk e di nqs jeni familjare me kete problem dhe si e keni zgjidhur.

O/S eshte Windows XP

[dardani8]

Matrix

Sic duket ti duhet se pari ta instalosh pjesen hardawrike , pra modemin per dail up e me tutje mundesh te provosh nese mundesh te lidhesh me isp.

shnet

[Matrix]

Modemi eshte i instaluar.

Kur e shoh tek Device Manager me del ok (pra pa ate shenjen e pikepyetjes).

Kjo eshte ajo qe me ngaterron

[dardani8]

Shiko deinstaloje njehere nga device manager dhe instaloje perseri hardware pra modemin dhe me pastaj pasi ta kesh instaluar hardawren instaloje edhe softwaren perkatese per te.

[Matrix]

e provova dje, por me del i njejti mesazh.

Ke ndonje sugjerim tjeter?

[dardani8]

shiko matrix nese din pak anglisht keto jane arsyet pse ndodhe kjo gje:
CAUSE
This behavior can occur if any of the following conditions exists:
• The modem is turned off or malfunctioning.
• If you have an external modem, the serial cable is incorrectly wired.
• If you have an external modem, the serial cable is not securely connected or has open connections.
• The serial port or multiport adapter on the RAS server or client is malfunctioning.
• The handshaking options for the modem are incorrectly configured.
• The modem is unsupported, or the chosen emulation may be incorrect.
• The modem .inf files become corrupted or the modem driver becomes corrupted.

e keto jane zgjidhjet e mundshme:

RESOLUTION
To resolve this problem, use the appropriate method:
• Reset your modem. Consult the documentation for information about how to reset the modem.
• If you have an external modem, make sure that you are using the correct serial cable. For more information about requirements for proper cabling, refer to the "Cabling Requirements" section in Dial-Up Networking Help.
• If you have an external modem, make sure that the serial cable is connected securely.
• If you are using a pin adapter to connect your external modem to your serial port, make sure that the pin adapter is wired properly for modem communication. For example, a 9- to 25-pin adapter for a mouse does not work properly with an RAS serial setup.
• Test the serial port or multiport adapter, and replace the adapter if necessary.
• Make sure that the handshaking options for the modem are configured properly. Consult the documentation for information about the different handshaking options that are available for your modem.
• Contact the modem manufacturer to see if any setup and initialization information is available for your modem. Also, check the latest Windows hardware compatibility list (HCL) to make sure that your modem is supported.
• Use Device Manager to remove the modem. You can do this in safe mode or in normal mode. Restart the computer in normal mode. Windows XP will redetect the modem and reinstall the correct drivers.

[ClaY_MorE]

Nuk eshte e thene se e ka fajin modemi.

Matrix per cfare lidhje e ke fjalen per ate te albtelekom ?

Nese behet fjale per albtelekom, provo ta besh serisht nga fillimi konfigurimin e internet connection.

[Matrix]

dardani8,

ato i kam gjetur dhe nga kerkimi ne Google apo nga informacioni qe jep vete troubleshooter-i. Por doja te dija dicka nga eksperienca juaj, nqs ju ka ndodhur ju dicka e tille dhe si eshte zgjidhur

Clay_more, behet fjale per albtelekom.

E kam provuar disa here ta ri-bej connection.
Por gjithmone eshte i njejti problem.