Zhbllokimi i celulareve Nokia

[ClaY_MorE]

lol e ka vete formatimin ajo...

mos e be si ai shoku yt me n-gage qe e bllokoi...
shko te impostimet dhe formatoje

ciao e hiqe ate flamur milanist

Nuk kerkoj ti bej Reset Factory Settings. Pasi ajo vetem sa rregullon te dhenat, zilen, etj.

Kerkoj program qe te programoj Celularin nga fillimi.

[ClaY_MorE]

Nuk ke nevoj per program
If you want to format your Nokia Series60 Symbian phone just write: *#7370# and press OK/Call. Confirm your action by pressing 'Yes'.

It may also work with other phones based on Series60.
Tested on Nokia 7650

Lorecone, Celulari nuk eshte me sistem symbian eshte i thjeshte.

Gjithsesi e provova ate kodin qe ke thene dhe me nxjerr : Result unknown.

Sic ja kam thene Renit me larte, kerkoj nje program ku mund ti ndryshoj ato kode qe kam harruar, pra ta riprogramoj.

[Lorencone]

nuk quhet formatim por flashim.Dhe te besh ate gje duhet te kesh usb kabell.Per mendimin tim mos u merr me ate pune se nje gabim te besh , te iken celulari per lesh

[ClaY_MorE]

E kam kabllin USB pasi e kam blere Celularin te ri me kuti

Vallaj me mire te ike per lesh sesa kshu si e kam bere

[benseven11]

Per ta formatuar provo te fikesh telefonin(turn of buton)
Pastaj mbaj te shtypur njekohsisht keto tre butona"talk" "3" dhe"*"
Pastaj e ndez telefonin"turn on"Sigurohu qe bateria te jete e ngarkuar mire.Mos bej asgje tjeter kur ben formatimin.Mbaje telefonin te lidhur me kabell me karikusin kur ben formatimin.
---
Normal Reset *#7780#
Deep Reset *#7370#
security code 12345

[Lorencone]

Per te gjithe ju te tjeret ketu keni kode per te gjitha llojet e celulereve
All Codes that I know for 6600

*#06# Serial Number/IMEI indicates

*#0000# SW version (e.g. V3.42.1, 16-10-03, NHL-10)

*#2820# Bluetooth (BT) device address

xx# Directory quick access (xx = storage location and afterwards lozenge e.g. 24 #)

On/Off key -short pressing for menu for switching between profiles

Menu key - Long pressing for "task manager" - switching between active programs (with "C" key programs can be terminated.)

Menu quick access - Over in the menu e.g. to point 3.1 arrive simply 31 enter (if the third symbol a file is opened is for these and then in it started the first Programm/Icon).

No Autostart - When switching the phone on up to the pin inquiry press the whole time the "ABC" key (pen) - this is to ignore the autoinitialization programs (and the MMC programs) - "safeboot".


12345 ... is according to be the standard Nokia nokia-securitycode.

0000 ... is according to be standard PIN2 at Vodafone (germany)


Caution - starting from here the codes are "dangerous"

*#7370925538#
*#Res0Wallet#
... is to delete the code around the "wallet"
Input like normal telephone number (not in wallet code inquiry windows).
NOTE! Afterwards the "wallet" is empty, can again be put on however with new code.

*#7780# - Reset to original settings
NOTE! Afterwards various "attitudes" are away - among other things these:
Points of entrance (Provider dependent points of entrance and attitudes)
Bluetooth attitudes
Favorite
Allocation of the two keys (beside Navi keys) in the main menue
Profiles are "neglected" (as with distribution) - still there however new bell tones, etc. are...
SMS/MMS/E Mail attitudes
Logos and spielstaende (allegedly) also deleted...
Programs, calendars and contacts, etc. not changed...

*#7370# - Soft format - resets all the telefone Memory (like Formatting a disk Smile
NOTE! Battery should be full up to at least 75%, do not accomplish during the procedure under any circumstances ! The procedure takes some minutes (approx. 3-4)

Green, * 3 - Hard format: If the Mobile (only telephone memory) formats, puts back the attitudes (see * to # 7780 #) and implements a RESET.
NOTE! Battery should be full up to at least 75%, do not accomplish during the procedure under any circumstances ! The procedure takes some minutes (approx. 3-4)

Proceeding: Equipment switch off, keep "green key" (take off) at the same time pressed, "*" and to "3" key and switch the equipment on (the keys thereby keep further pressed)... to "Formatting" on the display appears...



Nokia code Code function
*3370# This Nokia code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate Codec (EFR)
*#4720# Activate Half Rate Codec - Your phone uses a lower quality sound but you should gain approx 30% more Talk Time
*#4720# With this Nokia code you can deactivate the Half Rate Codec
*#0000# Displays your phones software version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd Line : Compression Type
*#9999# Phones software version if *#0000# does not work
*#06# For checking the International Mobile Equipment Identity (IMEI Number)
#pw+1234567890+1# Provider Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#pw+1234567890+2# Network Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#pw+1234567890+3# Country Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
#pw+1234567890+4# SIM Card Lock Status. (use the "*" button to obtain the "p,w" and "+" symbols)
*#147# This lets you know who called you last (Only vodofone)
*#1471# Last call (Only vodofone)
*#21# This phone code allows you to check the number that "All Calls" are diverted to
*#2640# Displays phone security code in use
*#30# Lets you see the private number
*#43# Allows you to check the "Call Waiting" status of your cell phone.
*#61# Allows you to check the number that "On No Reply" calls are diverted to
*#62# Allows you to check the number that "Divert If Unreachable (no service)" calls are diverted to
*#67# Allows you to check the number that "On Busy Calls" are diverted to
*#67705646# Phone code that removes operator logo on 3310 & 3330
*#73# Reset phone timers and game scores
*#746025625# Displays the SIM Clock status, if your phone supports this power saving feature "SIM Clock Stop Allowed", it means you will get the best standby time possible
*#7760# Manufactures code
*#7780# Restore factory settings
*#8110# Software version for the nokia 8110
*#92702689# Displays - 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000 for no repairs), 5.Transfer User Data. To exit this mode you need to switch your phone off then on again
*#94870345123456789# Deactivate the PWM-Mem
**21*number# Turn on "All Calls" diverting to the phone number entered
**61*number# Turn on "No Reply" diverting to the phone number entered
**67*number# Turn on "On Busy" diverting to the phone number entered
12345 This is the default security code
press and hold # Lets you switch between lines



Universal Codes for Nokia and other phones:-


Compatible Phones:-Alcatel,Bosch,Ericsson,Mitsubishi,Motorola,NEC,Nok ia,Philips,Samsung,Siemens,Sony



IMEI Code:-*#06# (on most phones) This should return a 15 character number,
which is the same as the one on the back of the phone. It is made up as follows.
123456 78 901234 5 12 = Manufacturer 52 = Ericsson 44 = Motorola 49 = Nokia
3456 = Type Approval Code 0518-0523 = 6110 3002 = 6150 78 = Final Assembly Code
07 = Germany 10 = Finland (all Nokia phones) 40 = UK 67 = USA 80 = China 81 = China
901234 = Serial Number 5 = Spare


GSM Code:-Call Diverting

Immediate
To Activate: * * 21 * NUMBER # [SEND]
To Cancel: # # 21 # [SEND]
To Check: * # 21 # [SEND]

Time Delay
To Activate: * * 002 * NUMBER * * (Time 5 to 30 Seconds) # [SEND]
To Cancel: # # 002 # [SEND]
To Check: * # 002 # [SEND]

Conditional
To Activate: * * 004 * NUMBER * * (Time 5 to 30 Seconds) # [SEND]
To Cancel: # # 004 # [SEND]
To Check: * # 004 # [SEND]

No Answer
To Activate: * * 61 * NUMBER * * (Time 5 to 30 Seconds) # [SEND]
To Cancel: # # 61 # [SEND]
To Check: * # 61 # [SEND]

Unreachable
To Activate: * * 62 * NUMBER # [SEND]
To Cancel: # # 62 # [SEND]
To Check: * # 62 # [SEND]

Engaged
To Activate: * * 67 * NUMBER # [SEND]
To Cancel: # # 67 # [SEND]
To Check: * # 67 # [SEND]

To Cancel All Call Forwarding
# # 002 # [SEND]



Call Barring

Barring All Outgoing Calls
To Activate: * 33 * BARRING CODE# [SEND]
To Cancel: # 33 * BARRING CODE # [SEND]
To Check: * # 33 # [SEND]

Barring All Outgoing International Calls
To Activate: * 331 * BARRING CODE# [SEND]
To Cancel: # 331 * BARRING CODE # [SEND]
To Check: * # 331 # [SEND]

Barring All Outgoing Iinternational (except to home country) Calls
To Activate: * 332 * BARRING CODE# [SEND]
To Cancel: # 332 * BARRING CODE # [SEND]
To Check: * # 332 # [SEND]

Barring All Incoming Calls
To Activate: * 35 * BARRING CODE # [SEND]
To Cancel: # 35 * BARRING CODE # [SEND]
To Check: * # 35 # [SEND]

Barring All Incoming Calls Whilst Outside Home Country
To Activate: * 351 * BARRING CODE # [SEND]
To Cancel: # 351 * BARRING CODE # [SEND]
To Check: * # 351 # [SEND]

Barring All Calls
To Activate: * 330 * BARRING CODE # [SEND]
To Cancel: # 330 * BARRING CODE # [SEND]
To Check: * # 330 # [SEND]

Barring All Outgoing Calls
To Activate: * 333 * BARRING CODE # [SEND]
To Cancel: # 333 * BARRING CODE # [SEND]
To Check: * # 333 # [SEND]

Barring All Incoming Calls
To Activate: * 353 * BARRING CODE # [SEND]
To Cancel: # 353 * BARRING CODE # [SEND]
To Check: * # 353 # [SEND]

Cancelling All Call Barring
# 330 * BARRING CODE # [SEND]





This banner was supplied by SAFE Audit


Call Wait/Hold


To Activate: * 43 # [SEND]
To Deactivate: # 43 # [SEND]
To Check: * # 43 # [SEND]

To end the call on hold or set UDUB (User Determined User Busy) for a waiting call press: 0 [SEND]
To end the current call press and accept the call on hold or waiting: 1 [SEND]
To release a specific call (where this call is X) press: 1X [SEND]
To place active call on hold and accept the other held or waiting call press: 2 [SEND]
To activate a specific call (where this call is X) and place all other's on hold press: 2X [SEND]
To add the held call to the current conversation press: 3 [SEND]
To make a new call and place current call's on hold enter: Number [SEND]
To end all call's together (except a waiting call) press: [END]



Call Line Identity (CLI)

Outgoing
To Activate: * 31 # [SEND]
To Deactivate: # 31 # [SEND]
To Check: * # 31 # [SEND]

Incoming
To Activate: * 30 # [SEND]
To Deactivate: # 30 # [SEND]
To Check: * # 30 # [SEND]



Diverting Data Calls

No Reply
To Activate: * * 61 * NUMBER * 25 # [SEND]
To Cancel: # # 61 * 25 # [SEND]
To Check Status: * # 61 # * 25 # [SEND]

Time Delay
To Activate: * * 61 * NUMBER * 25 * (Time 5 to 30 seconds) # [SEND]
To Cancel: # # 61 # * 25 # [SEND]
To Check Status: * # 61 # * 25 # [SEND]

Unreachable
To Activate: * * 62 * NUMBER * 25 # [SEND]
To Cancel: # # 62 # * 25 # [SEND]
To Check Status: * # 62 # * 25 # [SEND]

Busy
To Activate: * * 67 * NUMBER * 25 # [SEND]
To Cancel: # # 67 # * 25 # [SEND]
To Check Status: * # 67 # * 24 # [SEND]

Unconditional
To Activate: * * 21 * NUMBER * 25 # [SEND]
To Cancel: # # 21 # * 25 [SEND]
To Check Status: * # 21 # * 25 # [SEND]



Diverting Fax Calls

No Reply
To Activate: * * 61 * NUMBER * 13 # [SEND]
To Cancel: # # 61 * 13 # [SEND]
To Check Status: * # 61 # * 13 # [SEND]

Time Delay
To Activate: * * 61 * NUMBER * 13 * (5 to 30 seconds) # [SEND]
To Cancel: # # 61 # * 13 # [SEND]
To Check Status: * # 61 # * 13 # [SEND]

Unreachable
To Activate: * * 62 * NUMBER * 13 # [SEND]
To Cancel: # # 62 # * 13 # [SEND]
To Check Status: * # 62 # * 13 # [SEND]

Busy
To Activate: * * 67 * NUMBER * 13 # [SEND]
To Cancel: # # 67 # * 13 # [SEND]
To Check Status: * # 67 # * 13 #[SEND]

Unconditional
To Activate: * * 21 * NUMBER * 13 #[SEND]
To Cancel: # # 21 # * 13 # [SEND]
To Check Status: * # 21 # * 13 # [SEND]


Alcatel Secret Codes :-

To view IMEI (International Mobile Equipment Identity) number enter *#06#

To Enter Service Menu enter: *#000000#

To view Secret Menu type 000000 then press *

Secret Menu Appears
TRACES channel indicator menus
ARRETS - ?
VIDER ARRETS Press OK and the phone responds: This
action is executed!
CTRL CHARGE It show the charger voltage and battery
voltage.
DAMIER display test

The Service provider (SP) lock is used to lock the cell
phone to the SP's SIM card. Once the cell phone is
locked to a specific operator, if one inserts a SIM card
from a different operator the phone will refuse to
accept it! The cell phone will however accept another
SIM card from the same operator.

Removing SP lock on Alcatel Easy
This is how to remove the SP lock on Alcatel (one touch)
Easy. (You wil need a cable, a eeprom device and some sw)

Edit the eeprom:

Address Replace with
------------- ---------------
176h FFh
177h FFh


Bosch Secret Codes :-


*#3262255*8378# (*#DANCALL*TEST#) to make secret
Engineering menu (menu 10) appear.

10. Engineering
10.1 MS Info
10.1.1 on
10.1.2 off
10.2 Software details
10.2.1 Software version
10.2.2 EEPROM version
10.2 Test / Production details
10.3.1 Hardware data
10.3.2 Production data
10.3.3 Service data
10.3.4 Mechanical data

*#06# to display the IMEI (International Mobile Equipment Identity)
*#0000# to set the language automaticaly (Reset to english)
*#3370# to set the Enhaced Full Rate
#3370# to Reset the phone
*#9000# to enter sim lock code
*#9001# To enter the corporate code (Bosch 908)
*#9002# To enter the provider code (Bosch 908)
*#9003# to enter the network code
*#9004# to enter the subset code
*#9100# to remove the sim lock permanently
*#9101# to remove the corporate lock permanently
*#9102# to remove the provider lock permanently
*#9103# to remove the network lock permanently
*#9104# to remove the subset lock permanently

(SIM-lock is NOT the SP-lock/Service Provider lock!!)

The SIM-lock makes your phone to fusion with the
SIM-card, and the phone will not accept any other SIM
cards after you lock your phone! You get ten chances to
type the correct code! After the tenth time your phone
gets "SIM-lock permanently blocked", and you will be
unable to open it !! The best thing you can do is to
remove the SIM-lock permanently!!

Mitsubishi Secret Codes :-

Monitor mode: Hold C and press 379
Secret menu: Hold C and press 987
Version number: Hold C and press 597
Phase1 and 2 : Hold C and press 499
Warm start : Hold C and press 179
Instant turn off: Hold C and press 999
Unlock menu: Hold C and press 787090


Nokia codes

*#06# for checking the IMEI (International Mobile Equipment Identity)
*#0000# shows the SW version.
*#3370# - Enhanced Full Rate Codec (EFR) activation. It will automatically restart.
*#3370* - Enhanced Full Rate Codec (EFR) deactivation. It will automatically restart.
*#4720# - Half Rate Codec activation. It will automatically restart
*#4720* - Half Rate Codec deactivation. It will automatically restart
*#746025625# - Sim clock allowed status.

Enhanced Full Rate will give you much better sound quality when you enable it. The new Enhanced Full Rate CODEC adopted by GSM uses the ASELP (AlgebraicCode Excitation Linear Prediction) compression technology. This technology allows for much great voice quality in the same number of bits as the older Full Rate CODEC. The older technology was called LPC-RPE (Linear Prediction Coding with Regular Pulse Excitation). Both operate at 13 kilobits.(but you take up more space on the network, so they can charge you more) - Talk-time is reduced with about 5%

Half Rate will give you bad soundquality, which gives the serviceprovider the opportunity to have more calls on the network, and you might get a lower charge from them. - Will give you 30% longer talk-time.

Sim Clock Stop : *#746025625# apparently only works for 3 minuts.


*#92702689# - takes you to a secret menu with 6 choices
1) shows the serial nr.
2) shows when the cel phone was made mmyy
3) shows when the the cel. phone was purchased mmyy
4) shows how many times the cel. phone has been repaired.
5) makes u capebel of transferring user data if u have the gear for it
6) shows how many houres the phone has been on



Model Specific Codes for Nokia:-

Nokia 3210/5110/6110

To view IMEI number *#06#
To view Software Version enter *#0000#
To view Status of Sim Clock Stop. Enter *#746025625#
Latest Version is under Phone Info
Type is NSE-3NX
*#92702689# offers you Serial Number and also IMEI number. There are various options to scroll here.
The code is easier to remember as *#war0anty# (warranty)
The next screen is the date of manufacture in the format Made: 1197
The next screen is the purchase date in the format Purchasing Date: 1197 (this can be edited)
The next screen has Repaired: 0000 (presumable at repair the date is entered)
The next screen has Transfer User Data? (the same option as the 8110)
To exit turn the phone off and then back on.
*3370# to activate Enhanced Full Rate (*efr0#)
#3370# to deactivate Enhanced Full Rate (#efr0#)
*4720# to activate Half Rate (*hra0#) ONLY IN SOFTWARE VERSION V4.33 OR EARLIER
#4720# to deactivate Half Rate (#hra0#)
After pressing these codes the phone will shut down and start up again with the service activated/deactivated.
Unlock SP lock
Here is a way to Unlock your phone which is Service Provider locked, without to know SPLock code !!!!
Give it a try:
First of all, PIN CODE MUST BE ON, then press:
C

C and hold until it clears display
* and hold until start to blink
* and hold until start to blink
04* * *your pin#
Each time you turn your phone OFF it resets the lock, so this need to be done each time you'll turn your phone ON
Anyway it's better than nothing, isn't it?
6110 Sim Card Locking
There are four different types of Sim Locks on the 6110 (not sure about 5110 yet).
1 = Country Lock - Lock to Specific Country
2 = Network Lock - Lock to Network
3 = Provider Lock - Lock to Service Provider
4 = Sim Lock - Lock to Specific SIM Card
To see the status of your phone
#pw+(mastercode)+X#
(mastercode) is a 10 digit number WITHOUT the brackets.
X is a number 1 through 4, it shows the above locks. Not sure of which numbers are assigned to which lock yet. (The numbers above stand for X => for esample: 1 = Country Lock
Sim not restricted message means your phone is NOT sim locked - Check all 4 to be sure.
Most SIMs are locked with the Service Provider Lock => f.e. to the network of MAX



Nokia 1610

To view IMEI number *#06#
To view Software Version enter *#170602112302#
Latest Version is under Phone Info


Nokia 2010

To view IMEI number *#06#
To view Software Version enter *#9999#
Nokia 2110

To view IMEI number *#06#
To view Software Version enter *#9999#
Latest Version is under Phone Info
Type is NHE-1XN
Unlock SP lock
Here is a way to Unlock your phone which is Service Provider locked, without to know SPLock code !!!!
Give it a try
Turn the phone on, when the phone asks for the Security Code,
press:
112
now quickly press:
#
send
end
send
end.
Each time you turn your phone OFF it resets the lock, so this need to be done each time you'll turn your phone ON
Anyway it's better than nothing, isn't it?
Nokia 2110e/2110i

To view IMEI number *#06#
To view Software Version enter *#170602112302#
If you have latest software version you have to enter *#682371158412125#
Latest Version is under Phone Info
To view Week and Year of manufacture enter *#3283#
On phones prior to 01/01/96 1295 means December 95, On phones after 01/01/96 2196 means 21st week of 1996.
To enter small letters hold down the key for a few seconds and it will turn caps off


Nokia 3110

To view IMEI number *#06#
To view Software Version enter *#3110#
*#92702689# - phone asks warranty code:
There are a number of choices here
6232 (OK) : Displays the Month and Year of Manufacture
7332 (OK) : Displays the date of the last repair
7832 (OK) : Displays the date where the phone was purchased
9268 (OK) : Display Serial Number
37832 (OK) : Set the Purchasing Date MMYY
87267 (OK) : Confirm Transfer, Related to firmware upgrade.
*#746025625# - phone says 'SIM CLOCK STOP ALLOWED' or "SIM CLOCK STOP NOT ALLOWED" depending on your SIM Card.
*#7780# restores phone's factory settings.
Nokia 8110/8110i

To view IMEI number *#06#
To view Software Version enter *#8110#
Latest Version is under Phone Info.
*#92702689# - phone asks 'warranty code:'
There are a number of choices here
6232 (OK) : Displays the Month and Year of Manufacture
7332 (OK) : Displays the date of the last repair
7832 (OK) : Displays the date where the phone was purchased
9268 (OK) : Display Serial Number
37832 (OK) : Set the Purchasing Date MMYY
87267 (OK) : Confirm Transfer, Related to firmware upgrade.
*#746025625# - phone says 'SIM CLOCK STOP ALLOWED' or "SIM CLOCK STOP NOT ALLOWED" depending on your SIM Card.
Type of Phone is NHE-6


Nokia 8810

To view IMEI number *#06#

Nokia 9000/9000i

To view IMEI number *#06#
To view Software Version enter *#682371158412125#
Latest Version is under Phone Info
To view Week and Year of manufacture enter *#3283#



Philips Secret Codes :-

Blocking list *#3333*#
Time connected *#2558*#
Flags,something *#3377*#
Security code *#7489*#

Service Provider Lock

The Service provider (SP) lock is used to lock the cell
phone to the SP's SIM card. Once the cell phone is
locked to a specific operator, if one inserts a SIM card
from a different operator the phone will refuse to
accept it! The cell phone will however accept another
SIM card from the same operator.


IMEI code *#06#
SW info *#8377*#
Security code *#1234*#
*#2254*# Status register: C, BS, RR, MMI, CREAT.
*#2255*# activate and deactivate the "DEBUG CALL"-Mode; when activated, make a call to a busy line an the phone will disp some hex-codes on the disp.
*#2558*# the time in days,hours and minutes you are connected to the net
*#2562*# not clear; the phone reconnects to the net
*#2565*# not clear; warmstart ?
*#3333*# (NO) BLOCKING - list (15 items)
*#2377*# "BEER": not clear, the phone waits a random time and reconnects to the net, sometimes the phone makes a reset or something
*#3377*# Init, Flags, SIM LCK
*#3353*# resets the (NO) BLOCKING - list
*#7378*# Name, Length, SIM phase
*#7489*# SECURITY CODE
*#7693*# you can activate and deactivate the SLEEP MODE (when deactivated the battery will go down!)
*#7787*# not clear: SPURIOUS INTERRUPT
*#7948*# SWITCH OFF: not clear; it is a timer or something
*#8463*# Some information about the SLEEP MODE: Wake, Sleep Req., Sleep

Philips Genie (TCD838)
Type *#2337*# and it will be activate the beep signal when the cellphone reconnected to the net.


Sony Secret Codes :-


he Service provider (SP) lock is used to lock the cell
phone to the SP's SIM card. Once the cell phone is
locked to a specific operator, if one inserts a SIM card
from a different operator the phone will refuse to
accept it! The cell phone will however accept another
SIM card from the same operator.

Remove SP lock (For advanced users only)
Just edit your eeprom and at the address 16b-1D8 fill
this address with 00.
Show Software date Following procedure will show on your
phone the software date. Remove your SIM Card, then
press:

* # 06 #

and finally press:

[left softkey]

To enter Monitor Mode on Network Option menu
1. Menu 9 (Phone Options)
2. 7 (Phone Status)
3. [Left Display Button] (left MENU key)
4. 7684666
5. [HangUp Button] (Red HandSet key)

Show Software version and manufact. date Following
procedure will show on your phone the software version
in first row of the display and some CPU and OS info on
the second and third one. # 8377466 # (#version#)

On earlier version the above tip may not work, but you

can try this one:

In the menu go to PHONE SETTINGS
Jog down to: FACTORY SETTINGS and CLICK ONCE
You will see a display "Factory Setting Yes No" . Don’t
do anything with this display, leave it as it is.
Move the main switch of the phone briefly to the right
(briefly means long enough to secure a short electric
contact BUT short enough not to switch off the phone!)
Now you key in the following sequence:
# * 0 4 Will display info about sw (?)

[ClaY_MorE]

Lorecone, Faleminderit per mundimin me mbarove pune

[ronkbh]

Nokia 6280 c'bllokohet per momentin vetem nga kompania e celularareve ku telefoni eshte blere, ne kete rast 3.

[Kleidi]

Era1 flm per pergjigjen, por edhe aty nuk munden ta zbllokonin, pasi kerkon nje program te cilin sot per sot nuk e paska asnje servis cel. Keshtuqe me duhet ta vendos edhe nje here ne kuti cel, dhe ne pritje te programit

Mirulexofshim,
Redi

Per keta lloj telefonash qe ka nxjerre 3 i italise nuk ka as ne itali per zhbllokim. Them keshtu pasi une kam porositur nje telefon te tille dhe ma kane blere ne 3 por akoma nuk po e zhbllokojne pasi akoma nuk ka dale unlocker per kete. Ata te 3 i kane marre masat mire dhe kane bere nje tjeter menyre kodimi qe spo ja qendisin dot :P ...
Do ishte mire ta kishe lene ne itali tel dhe ta zhbllokonin atje se ne Shqiperi harroje zhbllokimin per nja 3 muj !
Megjithate shpresoj ta zhbllokosh dhe po e zhbllokove na thuj dhe neve

[KraX/UAC]

Per keta lloj telefonash qe ka nxjerre 3 i italise nuk ka as ne itali per zhbllokim.

Cfare thua ore Kleidi po hajde ne Parma se ta zbllokoj une ne 15 sekonda!!!!
Celularet nokia te kompanise Italiane 3 nuk zhbllokohen me kode sepse kane bllokimin ne firmware dhe nuk asnje bllokim hardware qe kerkoni ti zhbllokoni me kode!!
Per ti zbllokuar duhet SmartClip/UnlockRelock mund ta gjeni po te beni nje kerkim tek ebay!!!
Pershendtje!!!