Konfigurimi i HP Laserjet 4050 ne LAN

[hasan2005]

Tung
Me intereson te dije (hap pas hapi) se si mund te kyc nje printer hp laserjet 4050 ne rrjet. Ajo kryesorja eshte se si mundem qe ti vendos IP printerit.
Pra si mund te ja vendos IPne e ti perderisa ai nuk ka qene me heret i kycur ne rrjet.

faleminderit.

[Benicompany]

Hej Shokit ,

nese e din Anglishten prevoje qeshtu qysh po shkrun ketu.
Nese nuk te ndimon tregom .

// Benicompany

__________________________________________________ ______________


To configure TCP/IP parameters from the control panel, use the following instructions:


Press the MENU button

Press the ITEM button until CFG NETWORK = NO appears.

Press the PLUS or VALUE button until CFG NETWORK = YES appears.



NOTE: The CFG NETWORK = XXX (XXX being YES or NO) is a toggle, not a permanent setting. Changing it to YES allows the settings to be changed at that time. It will appear as CFG NETWORK = NO each time this menu is accessed.


Press SELECT or RESUME.

Press ITEM repeatedly until CFG TCP/IP = NO appears.

Press the PLUS or VALUE button until CFG TCP/IP = YES appears.



NOTE: The CFG TCP/IP = XXX (XXX being YES or NO) is a toggle, not a permanent setting. Changing it to YES allows the settings to be changed at that time. It will appear as CFG TCP/IP = NO each time this menu is accessed.


Press SELECT or RESUME.

Press the ITEM repeatedly until BOOTP = YES* appears.

Press the PLUS or VALUE button until BOOTP = NO appears.



NOTE: When using BootP or DHCP, keep the setting BOOTP = YES *. The BootP or DHCP server will configure the TCP/IP parameters on the HP Jetdirect. No other TCP/IP configuring is necessary.

Press SELECT or RESUME.

The following two steps apply to the HP Jetdirect 610n cards only:

DHCP=YES appears.

Press the PLUS or VALUE button until DHCP = NO appears.



NOTE: When using DHCP, keep the setting DHCP = YES *. The DHCP server will configure the TCP/IP parameters on the HP Jetdirect. No other TCP/IP configuring is necessary.

Press SELECT or RESUME.

Press ITEM until IP BYTE 1 = (value*) appears.

Press the PLUS or VALUE button, until the desired value of the first byte of the IP address appears. By pressing and holding the PLUS or VALUE button, the value will scroll rapidly (HP LaserJet 4000, 5000, and 8000 printers have a MINUS button to decrease the value).

Press SELECT or RESUME to save the value.

Press ITEM to continue. Repeat Steps 11-13 to configure the remaining bytes of the IP address.

Repeat Steps 11-13 to configure the subnet mask bytes (SM BYTE 1=), syslog server IP address (LG BYTE 1=), default gateway (GW BYTE 1=), and timeout (TIMEOUT=).

Press ONLINE, GO or MENU. Print a self-test page to verify the IP settings.

If the test page does not show the correct settings, power cycle the printer and reprint the test page.

[bekim rama]

kam nje problem ! kompjuteri qe une e shfrytzoj është pentium IV dhe sis.oper. win. Xp mirëpo nuk kam mundësi ta konfiguroj në kompjuterin tim --nje scanner me emër GENIUS COLOR PAGE II ku ta gjej një driver për ta futur në punë edhe pse une disa herë kam kërkuar në web faqe miëpo nuk ka mundur asnjë driver për ta aktivizuar
e falenderoj paraprakisht atë që më tregon diqka ......

[Eagle]

Ndiq kete link dhe bej nje regjistrim free. besoj se do te gjesh driver per scanerin tend.
http://members.driverguide.com/ums/i...3512865v396099

[Benicompany]

Bekim_Rama ,

nuk e di a e ki rregullu ket pun hala , po nese jo prevoje ket link.
Eshte Driver per Color-Page Vivdi III V2 po duhet me ba edhe per tani.
Eshte WinXp Driver.

Driver Link